Journal Publications before 2013

  1. Ferdous, R., Khan, F., Sadiq, R., Amyotte, P., & Veitch, B. (2012). Handling and updating uncertain information in bow-tie analysis. Journal of Loss Prevention in the Process Industries, 25(1), 8–19.
  2. Hasan, SM, Khan, F., & Kenny, S. (2012). Probability assessment of burst limit state due to internal corrosion. International Journal of Pressure Vessels and Piping, 89, 48–58.
  3. Hasan, SM, Khan, F., & Kenny, S. (2012). Probabilistic Transgranular Stress Corrosion Cracking Analysis for Oil and Gas Pipelines. Journal of Pressure Vessel Technology.
  4. Hassan, J., Khan, F., & Hasan, M. (2012). A risk-based approach to manage non-repairable spare parts inventory. Journal of Quality in Maintenance Engineering, 18(3), 344–362.
  5. Hassan, J., & Khan, F. (2012). Risk-based asset integrity indicators. Journal of Loss Prevention in the Process Industries, 25(3), 544–554.
  6. Keshavarz, Gaffar, Khan, F., & Hawboldt, K. (2012). Modeling of pool fires in cold regions. Fire Safety Journal, 48(null), 1–10.
  7. Keshavarz, Ghaffar, Thodi, P., & Khan, F. (2012). Risk-based shutdown management of LNG units. Journal of Loss Prevention in the Process Industries, 25(1), 159–165.
  8. Khakzad, N., Khan, F., & Amyotte, P. (2012). Dynamic risk analysis using bow-tie approach. Reliability Engineering & System Safety, 104, 36–44.
  9. Khalifa, Mohamed, Khan, F., & Haddara, M. (2012). Bayesian sample size determination for inspection of general corrosion of process components. Journal of Loss Prevention in the Process Industries, 25(1), 218–223.
  10. Khalifa, Mohamed, Khan, F., & Haddara, M. (2012). A methodology for calculating sample size to assess localized corrosion of process components. Journal of Loss Prevention in the Process Industries, 25(1), 70–80.
  11. Noroozi, A., Khan, F., MacKinnon, S., Amyotte, P., & Deacon, T. (2012). Determination of human error probabilities in maintenance procedures of a pump. Process Safety and Environmental Protection
  12. Rathnayaka, Samith, Khan, F., & Amyotte, P. (2012). Accident modeling approach for safety assessment in an LNG processing facility. Journal of Loss Prevention in the Process Industries, 25(2), 414–423.
  13. Waheed, B., Khan, F. I., Veitch, B., & Hawboldt, K. (2012). Ranking Canadian universities: a quantitative approach for sustainability assessment using uD-SiM. International Journal of Sustainable Engineering, 5(4), 357–373.
  14. Yang, Ming, Khan, F. I., & Lye, L. (2012). Precursor-based hierarchical Bayesian approach for rare event frequency estimation: A case of oil spill accidents. Process Safety and Environmental Protection
  15. Zadakbar, O., Imtiaz, S., & Khan, F. (2012). Dynamic Risk Assessment and Fault Detection Using Principal Component Analysis. Industrial & Engineering Chemistry Research, 52(2), 809–816. doi:10.1021/ie202880w
  16. Abbassi, R., Dadshzadeh, M., Khan, F., and Hawboldt, K. (2011). Risk-based Prioritization of Indoor Air Pollution Monitoring using Computational Fluid Dynamics. Indoor and Build Environment. DOI: 10.1177/1420326X11428164.
  17. Yang, M., Khan, F., and Sadiq, R.(2011). Prioritizing Environmental Issues in Offshore Oil and Gas Operations - A Fuzzy Inference System. Journal of Process Safety and Environmental Protection, 89 (1). 22 – 34.
  18. Keshavarz, G., Khan, F., and Hawboldt, K. (2011). Modeling of Pool Fires in Cold Regions. Fire Safety Journal. 1–10.
  19. Chang, Y., Khan, F., and Ahmed, S. (2011). A risk-based approach to design warning system for processing facilities. Process Safety and Environmental Protection, 89(5). 310 –316.
  20. Waheed, B., Khan, F., Veitch, B., and Hawboldt K. (2011). An Integrated Decision-Making Framework for Sustainability Assessment: A Case Study of Memorial University. Higher Education Policy. 1–18.
  21. Waheed, B., Khan, F., Veitch, B., and Hawboldt K. (2011). Uncertainty based quantitative assessment for sustainability for higher education institution. Journal of cleaner production, 19, 720 -732.
  22. Waheed, B., Khan, F., and Veitch, B. (2011). Developing quantitative tool for sustainability assessment of HEIs. International Journal of higher sustainability in higher education, 12, 355 - 368.
  23. Hasan, M., Khan, F., and Kenny, S. (2011). Identification of the cause of variability of probability of failure for different codes and standards. Journal of Pressure Vessel Technology, 133(4).
  24. Yang, M., Khan, F., and Sadiq, R. (2011). Prioritization of environmental issues in offshore oil and gas operations: A hybrid approach using fuzzy inference system and fuzzy analytic hierarchy process. Process Safety and Environmental Protection, 89 (1). 22 – 34.
  25. Yang, M., Khan, F., Sadiq, R., and Amyotte, P. (2011). A rough set-based quality function deployment (QFD) approach for environmental performance evaluation: a case of offshore oil and gas operations. Journal of Cleaner Production, vol.19 (13), 1513 –1526.
  26. Khakzad, N., Khan, F., and Amyotte, P. (2011). Safety analysis in process facilities: Comparison of fault tree and Bayesian network approaches. Reliability Engineering and System Safety, 96. 925 – 32.
  27. Zadakbar, O., Abbassi, R., Khan, F., Karimpour, K., Golshani, M., and Vatani, A. (2011). Risk Analysis of Flare Flame-out Condition in a Gas Process Facility. Oil & Gas Science and Technology - Rev. IFP Energies nouvelles, 66 (3). 521– 530.
  28. Bao, H., Khan, F., Iqbal, T., and Chang, Y. (2011). Risk-Based Fault Diagnosis and Safety Management for Process Systems. Process Safety Progress, 30(1). 6 –17.
  29. Dadashzadeh, M., Khan, F., Hawboldt, K., and Abbassi, R. (2011) Emission Factor Estimation for Oil and Gas Facilities. Process Safety and Environmental Protection, 89. 295 – 299
  30. Rathnayaka, S., Khan, F.I. and Amyotte, P. (2011). SHIPP Methodology: Predictive Accident Modeling Approach. Part I: Methodology and Model Description. Process safety and Environmental Protection, 89(3). 151–164.
  31. Rathnayaka, S., Khan, F.I., and Amyotte, P. (2011). SHIPP Methodology: Predictive Accident Modeling Approach. Part II: Validation with case study. Process safety and Environmental protection, 89(2). 75 – 88.
  32. Deacon, T., Amyotte, P., and Khan, F. (2010). Human Error Risk Analysis in Offshore Emergencies. Safety Science, vol. 48(6). 803-818.
  33. Bailey, J., Amyotte, P., and Khan, F. (2010). Agricultural Application of Life cycle analysis index – LInX for effective decision-making. Journal of Cleaner Production,18. 1703-1713.
  34. Kalantarnia, M., Khan, F., and Hawboldt, K. (2010). Modeling of BP Texas Refinery Accident using Dynamic Risk Assessment Approach. Process Safety and Environmental Protection, 88 (3).191-199.
  35. Iliyas, A., Hawboldt, K., and Khan, F. (2010). Advanced kinetics for calorimetric techniques and thermal stability screening of sulfide minerals. Thermochimica Acta, 501(1-2). 35-45
  36. Iliyas, A., Hawboldt, K., and Khan, F. (2010). Advanced kinetic simulation of sulfide minerals oxidation using DSC. Journal of Hazardous Material, 178 (1-3). 814-822.
  37. Thodi, P., Khan, F., and Haddara, M. (2010). The development of posterior probability models for risk based integrity modeling. Risk Analysis, 30, 3. 400-420.
  38. Abbassi, R., Khan, F., and Hawboldt, K. (2010). Ecological Risk-based Performance Evaluation of a Waste Stabilization Pond. Environmental Engineering and Management Journal, 9(6). 757-764.
  39. Abbassi, R., Khan, F., and Hawboldt, K. (2010). A Methodology of Finding Dispersion Coefficient Using Computational Fluid Dynamics (CFDs). International Journal of Water Resources and Environmental Engineering, 2(4). 109-115.
  40. Hossain, K. A., Khan, F.I., and Hawboldt K. (2010). SusDesign-An Approach for a Sustainable Process System Design and its Application to a Thermal Power Plant. Applied Thermal Engineering, 30 (14 -15). 1896 - 1913.
  41. Ferdous, R., Khan, F., Sadiq, R., Amyotte, P., and Veitch, B. (2010) Fault and Event Tree Analyses for Process Systems Risk Analysis: Uncertainty Handling Formulations. Risk Analysis, 31(1). 86-107.
  42. Kujath, M. F., Amyotte, P., and Khan, F. (2010). A Conceptual Offshore Oil And Gas Process Accident Model. Journal of Loss Prevention in the Process Industries, 23 (2). 323-330.
  43. Khalifa, M., Khan, F., Haddara, M. (2010) Reliability based inspection of nickel-based alloy welds in boiling water reactor environment. Reliability Engineering and System Safety, 95(5). 494-498.
  44. Waheed, B., Khan, F., and Veitch, B. (2009). Linkage-Based Frameworks for Sustainability Assessment: Making A Case For DPSEEA. Sustainability, 1(3). 441-463
  45. Thodi, P., Khan, F., and Haddara, M. (2009). The Selection of Corrosion Prior Distributions for Risk Based Integrity Modeling. Journal of Stochastic and Environmental Risk Model, 23. 793-809.
  46. Khan, F.I., AbuNada, H., John, D., and Benmosbeh, T. (2009). Development of Risk-based Process Safety Indicators. Process Safety Progress, 29.
  47. Ferdous, R., Khan, F., Amyotte, P., and Veitch, B. (2009). Methodology for computer aided fuzzy fault tree analysis. Process Safety and Environment Protection, 87(4). 217–226.
  48. Ferdous, R., Khan, F., Sadiq, R., Amyotte, P., and Veitch, B. (2009). Handling Data Uncertainties in Event Tree Analysis. Process Safety and Environment Protection, 87(5), 283–292.
  49. Kalantarnia, M., Khan, F., and Hawboldt, K. (2009). Dynamic Risk Assessment using Failure Assessment and Bayesian Theory. Journal of Loss Prevention in Process Industries, 22(5). 600-606.
  50. Khalifa, M., Khan, F., and Haddara, M. (2009). Optimal selection of non-destructive inspection technique for welded components. Insight: Non-Destructive Testing and Condition Monitoring, 51(4). 192-200.
  51. Abbassi, R., Khan, F., and Hawboldt, K. (2009). Prediction of Minerals Producing Acid Mine Drainage (AMD) using a Computer Assisted Thermodynamic Chemical Equilibrium Model. Journal of Mine Water and the Environment, 28. 74-78.
  52. Rahman, S., Khan, F., Veitch, B., and Amyotte, P. (2009). ExpHAZOP+: Knowledge-based expert system to conduct automated HAZOP analysis. Journal of Loss Prevention in Process Industries, 22(4). 373-380.
  53. Nazir, M., Khan, F. and Amyotte, P. (2008). Subsea Release of Oil from a Riser: An Ecological Risk Assessment. Risk Analysis, 28 (5). 1175-1195.
  54. Khandoker, A., Khan, F., and Hawboldt, K. (2008). E-Impact: A Robust Hazard-Based Environmental Impact Assessment Approach For Process Industries. Journal of Science and Technology, 3. 48 – 61.
  55. Tugnoli, A., Khan, F., Amyotte,P., and Cozzani, V. (2008). Safety Assessment in Plant Layout Design using Indexing Approach: Implementing Inherent Safety Perspective: Part 1 – Guideword applicability and method description. Journal of Hazardous Materials, 160 (1). 100 - 109.
  56. Tugnoli, A., Khan, F., Amyotte,P., and Cozzani, V. (2008) Safety Assessment in Plant Layout Design using Indexing Approach: Implementing Inherent Safety Perspective: Part 2 – Domino Hazard Index and Case Study. Journal of Hazardous Materials,160 (1). 110 - 121.
  57. Nazir, M., Khan, F. and Amyotte, P. (2008). Fatigue Reliability Analysis of Deep Water Rigid Marine Risers Associated with Morison-Type Wave Loadin. Stochastic Environmental Research & Risk Assessment, 22(3). 379-380.
  58. Khan, F.I., Haddara, M., and Krishnasamy, L. (2008). A New Methodology for Risk-Based Availability Analysis. IEEE journal on Reliability Engineering, 57(1). 103-112.
  59. Nazir, M., Khan, F., and Amyotte, P. (2008). Multimedia Fate of Oil Spills in a Marine Environment – An Integrated Modeling Approach. Process Safety and Environmental Protection, 86(2). 141-148.
  60. Khandoker, A., Khan, F., and Hawboldt, K. (2008). Sustainable Development of Process Facilities: State-of-the-art Review of Pollution Prevention Frameworks. Journal of Hazardous Materials, 150. 4–20.
  61. Nan, C., Khan, F., and Iqbal, T. (2008) Fault diagnosis using G2 expert system Shell and real time monitoring. Process Safety and Environmental Protection, 86(1). 55-71
  62. Amyotte, P.R., Khan, F., and Pegg, M. (2008). Application of Inherent Safety Principles in Dust Explosion Prevention and Mitigation. IChemE Symposium Series # 153. 1-6
  63. Amyotte, P.R., Goraya, A., Khan, F.I., and Hendershot, D. (2007). Incorporation of Inherent Safety Principles in Process Safety Management. Process Safety Progress, 26 (4). 333 – 346.
  64. Amyotte, P.R., Pegg, M., Khan, F.I., Nifuku, M., and Yingxin, T. (2007). Moderation of Dust Explosion. Journal of Loss Prevention in Process Industries, 20(4-6). 675-687.
  65. Khandoker, A., Khan, F., and Hawboldt, K. (2007). E-Green - A Robust Risk-based Environmental Assessment Tool for Process Industries. Industrial & Engineering Chemistry Research, 46 (25). 8787 -8795.
  66. Khan, F. and Amyotte, P.R. (2007). Modeling of British Petroleum Refinery Accident. Journal of Loss Prevention in the Process Industries, 20. 387–395.
  67. Pula, R., Khan, F.I., Amyotte, P.R., and Veitch, B. (2007). A model for estimating the probability of missile impact: missile originating from bursting horizontal cylindrical vessel. Process Safety Progress, 26(2). 129-140.
  68. Ferdous., R., Khan, F., Amyotte, P., and Veitch, B. (2007). Methodology for Computer Aided Fault Tree Analysis. Process Safety and Environmental Protection, 85(B1), 70-80.
  69. Khan, F. and Howard, R. (2007). Statistical Approach to Inspection Planning And Integrity Assessment. British Journal on NDT, 49(1). 1-11
  70. Sadiq, R. and Khan, F. (2006). An integrated approach for risk based life cycle analysis assessment and multi criteria decision making: selection, design, and evaluation of cleaner and greener processes. Business process management Journal, 12(6). 770-792.
  71. Nazir, M. and Khan, F.I. (2006). Human health risk modeling for various exposure routes of Trihalomethanes (THMs) in potable water supply. Journal of Environmental Modeling and Software, 21. 1416-1429.
  72. Khan, F.I., Haddara, M., and Bhattacharya, S.K. (2006).Risk based Integrity and Inspection Modeling (RBIIM) of Process Components/System. Risk Analysis, 26(1). 203-221
  73. Attwood, D, Khan, F, and Veitch, B. (2006). Offshore Oil & Gas Occupational Accidents – Where have we been and where are we going? Journal of Loss Prevention in process Industries, 19, 664-682.
  74. Khan, F.I., Amyotte, P., and DiMattia, D.G. (2006). HEPI: A new tool for human error probability calculation for offshore operation. Safety Science, 44. 313-334
  75. Attwood, D., Khan, F.I. and Veitch, B. (2006). An analysis of occupational accident models, Journal of Loss Prevention in the process industries, 19. 2-18
  76. Attwood, D, Khan, F, and Veitch, B. (2006). Predicting Offshore Occupational Accident Frequency – A practical demonstration using case studies. Process Safety Progress, 25(2), 160-172.
  77. Attwood, D, Khan, F, and Veitch, B. (2005). Can we predict occupational accident frequency? Process Safety and Environmental Protection - Official journal of the European Federation of Chemical Engineering: Part B 84 (B2), 1-14
  78. Khan, F.I. and Amyotte, P.R. (2005). I2SI: A comprehensive quantitative tool for inherent safety and cost evaluation. Journal of Loss Prevention in Process Industries, 18, 310-326.
  79. Amyotte, P.R., Khan, F.I., and DiMattia, D.G. (2005). Determine human error probabilities for offshore platform muster. Journal of Loss Prevention in Process Industries, 18, 488-501.
  80. Pula, R., Khan, F.I., Amyotte, P.R., and Veitch, B. (2005). Revised fire consequence model for offshore quantitative risk assessment. Journal of Loss Prevention in Process Industries, 18, 443-454.
  81. Pula, R., Khan, F.I., Amyotte, P.R., and Veitch, B. (2005). A grid based approach for fire and explosion consequence analysis. Process Safety and Environmental Protection, 84(B3), 1-13.
  82. Amyotte, P., Basu, A., and Khan, F.I., (2005). Dust explosion hazard of pulverized fuel carry over. Journal of Hazardous Material, A122, 25-30.
  83. Khan, F.I., and Sadiq, R., (2005). Risk-based prioritization of air pollution monitoring using fuzzy synthetic evaluation technique. Environmental Monitoring and Assessment, 105, 261-283.
  84. Nazir, M., Khan, F.I., and Husain, T. (2005). A revised approach for air quality modeling using PDF approach. Journal of Hazardous Materials, A118, 53-65.
  85. Loganathan, K., Khan, F.I. and Haddara, M. (2005). Development of a Risk Based Maintenance (RBM) Strategy for a Power Generating Plant. Journal of Loss Prevention in Process Industries, 18, 69-81.
  86. Sadiq, R., and Khan, F. (2005). Risk based life cycle assessment methodology for green and clean process selection and design decision-making. Computers and Chemical Engineering, 29(5), 1023-1039.
  87. Khan, F. I., Howbaldt, K., and Iqbal, T. (2005). Life cycle of wind-fuel cell integrated system. Renewable Energy, 30,157-177.
  88. Khan, F.I., and Haddara, M., (2004). RBM: A New Approach for Process Plant Inspection and Maintenance, Process Safety Progress, 23(4), 252-265.
  89. Khan, F.I., Sadiq, R., and Haddara, M. (2004). Risk-based inspection and maintenance (RBIM): multi-attribute decision-making with aggregative risk analysis. Process Safety & Environmental Protection (Transaction of IChemE), 82B (6), 398-411.
  90. Khan, F.I., and Amyotte, P. (2004). Integrated Inherent Safety index (I2SI): a tool for inherent safety evaluation. Process Safety Progress, 23(2), 136-148.
  91. Goraya, A., Amyotte, P.R., and Khan, F.I. (2004). An Inherent Safety-Based Incident Investigation Methodology. Process Safety Progress, 23(3), 197-205.
  92. Khan, F.I., Husain, T, and Hejazi, R. (2004). An overview and analysis of site remediation technologies. Journal of Environmental Management, 71, 95-122.
  93. Khan, F.I., and Haddara, M. (2004). Risk-Based Maintenance of ethylene oxide process plant, Journal of Hazardous Materials, A108, 147-159.
  94. Khan, F.I., Sadiq, R., and Veitch, B. (2004). Life cycle Index (LInX): A new indexing procedure for process and product design and decision-making. Journal of Cleaner Production, 12, 59-76.
  95. Amyotte, P., Basu, A., and Khan, F.I. (2003). Reduction of dust explosion hazard by fuel substitution in power plants. Transaction of IChemE (Process Safety & Environmental Protection), 81B, 457-462.
  96. Khan, F.I., and Husain, T. (2003). Water quality trend analysis in selected watersheds of Atlantic region. Environmental Monitoring and Assessment, 88, 221-242.
  97. Khan, F.I., and Haddara, M. (2003). Risk-Based Maintenance (RBM): A quantitative approach for maintenance/inspection scheduling and planning. Journal of Loss Prevention in Process Industries, 16, 561-573.
  98. Hejazi, R., Husain, T., and Khan, F. (2003). Landfarming Operation in Arid Region - Human Health Risk Assessment. Journal of Hazardous Materials, B99, 287-302.
  99. Amyotte, P.R., Khan, F.I., and Dastidar, A.G. (2003). Reduce dust explosions the inherently safer way (also presented in LPS conference). Chemical Engineering Progress, 99(10), 36-44.
  100. Khan, F.I., Sadiq, R., and Amyotte, P. (2003). Evaluation of available Indices for Inherent Safer design Options. Process Safety Progress, 22(2).
  101. Khan, F.I. and Husain, T. (2003). Evaluation of a Petroleum Hydrocarbon Contaminated Site for Natural Attenuation using “RBMNA” Methodology. Environmental Modeling and Software, 18. 179-194.
  102. Khan, F.I. and Amyotte, P. (2003). How to Make Inherent Safety Practice A Reality, Canadian Journal of Chemical Engineering, 81, 2-16.
  103. Fisher, A.L., Parsons, M.C., Roberts, S.E., Shea, P.J., Khan, F.I., and Husain, T. (2003). Long-term SO2 dispersion modeling over a coastal region. Environmental Technology, 24, 1- 11.
  104. Khan, F.I., Raveender, V., and Husain, T. (2002). Effective environmental management through life cycle assessment. Journal of Loss Prevention in Process Industries, 15, 455-466.
  105. Khan, F.I. and Abbasi, S.A. (2002). A criterion for developing credible accident scenarios for risk assessment. Journal of Loss Prevention in Process Industries, 15, 467-475.
  106. Etowa, C.B., Amyotte, P.R. Pegg, M.J., and Khan, F.I. (2002). Quantification of inherent safety aspects of Dow index. Journal of Loss Prevention in Process Industries, 15, 279-289.
  107. Khan, F.I., Sadiq, R., and Husain, T. (2002). GreenPro-I: A risk-based life cycle assessment and decision-making methodology for process plant design. Environmental Modeling & Software, 17, 669-691.
  108. Amyotte, P. and Khan, F.I. (2002). An inherent safety framework for dust explosion prevention and mitigation. Journal de Physique IV, 12, Pr7-189- Pr7-195.
  109. Khan, F.I. and Amyotte, P. (2002). Inherent Safety in Offshore Oil and Gas Activities: A Review of the Present Status and Future Directions. Journal of Loss Prevention in Process Industries, 15, 279-289.
  110. Khan, F.I., Husain, T., and Abbasi, S.A. (2002). Design and evaluation of safety measures using a newly proposed methodology “SCAP”. Journal of Loss Prevention in Process Industries, 15, 129-146.
  111. Khan, F.I. and Abbasi, S.A. (2002). Design of Greenbelt for an Industrial Complex Based on Mathematical Modeling. Environmental Technology, 23(7) 799-811.
  112. Khan, F.I., Sadiq, R., and Husain, T. (2002). Risk based process safety assessment and control measures design for offshore process facilities. Journal of Hazardous Materials, A94, 1-36.
  113. Khan, F.I. and Husain, T. (2002). Risk assessment and safety evaluation using probabilistic fault tree analysis. Journal of Human and Ecological Risk Assessment, 7(7), 1909-1927.
  114. Khan, F.I. and Husain, T. (2002). Evaluation of Contaminated Sites using Risk Based Monitored Natural Attenuation. Chemical Engineering Progress-AIChE, USA, January,34-44.
  115. Khan, F.I. and Abbasi, S.A. (2001). Analytical Simulation and PROFAT-II: a new technique and tool for fault tree analysis in chemical process industries. Journal of Hazardous Materials, A75, 1-27.
  116. Khan, F.I. and Husain, T. (2001). Risk based monitored natural attenuation – A Case Study. Journal of Hazardous Materials, B85, 243-272.
  117. Khan F.I. (2001). Maximum credible Accident scenario for realistic and reliable risk assessment. Chemical Engineering Progress, 55-67.
  118. Khan F.I., Husain, T., and Abbasi, S.A. (2001). Safety Weighted Hazard Index (SweHI): A new, User-friendly tool for swift yet comprehensive hazard identification and safety evaluation in chemical process industries. Transaction of IChEM UK, B79, 1-16.
  119. Khan, F.I., Iqbal, A., Ramesh, N., and Abbasi, S.A. (2001). SCAP: A new methodology for safety management based on feedback from credible accident-probabilistic fault tree analysis. Journal of Hazardous Materials, A87, 23-56.
  120. Khan, F.I., Iqbal, A., and Abbasi, S.A. (2001). An Assessment of the likelihood of occurrence, and the damage potential of domino effect (chain of accidents) in a typical cluster of industries. Journal of Loss Prevention in Process Industries, 14, 283-306.
  121. Khan, F.I., Iqbal, A., and Abbasi, S.A. (2001). Rapid Risk Assessment of a fertilizer industry using recently developed computer automated tool TORAP. Journal of Loss Prevention in Process Industries, 14(3), 215-221.
  122. Khan, F.I., Iqbal, A., and Abbasi, S.A. (2001). Risk Analysis of a Petrochemical Industry Using ORA (Optimal Risk Analysis) Procedure. Process Safety Progress-AIChE, 20(1), 1-16.
  123. Khan, F.I. and Abbasi, S.A. (2001). Estimation of probabilities and likely consequences of a chain of accidents (domino effect) in Manali Industrial Complex. Journal Cleaner Production, 9(5) 415-423.
  124. Khan, F.I. and Abbasi, S.A. (2001). Effective design of greenbelts using mathematical models, Journal of Hazardous Materials, 81(1-2), 33-65.
  125. Khan, F.I., Natrajan, B.R., and Revathi, P. (2001). GreenPro: a new methodology for cleaner and greener Process design. Jour of Loss Prevention in Process Industries, 14(2),107-119.
  126. Khan, F.I. and Abbasi, S.A. (2001). Risk analysis of a typical chemical industry using ORA. Journal of Loss Prevention in Process Industries, 14(1) 43-59.
  127. Khan, F.I. and Abbasi, S.A. (2000). EXPERTOP- A expert system tool conducting HAZOP study in chemical and petrochemical industries. Environmental Modeling and Software, 15(1), 67-77.
  128. Khan, F.I. and Abbasi, S.A. (2000). Attenuation of Gaseous Pollutants by Greenbelts. Environmental Monitoring & Assessment , 64 (2), 457-75.
  129. Khan, F.I. and Ghoshal, A.K. (2000). Removal of VOC from polluted air. Journal of Loss Prevention in Process Industries, 13(6), 527-545.
  130. Khan, F.I. and Abbasi, S.A. (2000). Modeling and simulation of heavy gas dispersion on the basis of modifications in plume path theory. Journal of Hazardous Materials, 80(1-3), 15-30.
  131. Khan, F.I. and Abbasi, S.A. (2000). Cushioning the impact of toxic release from runaway industrial accidents with greenbelts. Journal of Loss Prevention in Process Industries, 13(2), 109-124.
  132. Khan, F.I. Natrajan, B.R. and Abbasi, S.A. (2000). Avoid the domino effect via proper risk assessment. Chemical Engineering Progress, 63-76.
  133. Khan, F.I. and Abbasi, S.A. (2000). Towards automation of HAZOP with a new tool EXPERTOP. Environmental Modeling and Software, 15, 67-77.
  134. Khan , F.I. and Abbasi, S.A. (2000). Studies on the probabilities and likely impacts of chain of accidents (domino effect) in fertilizer industry. Process Safety Progress, 19(1), 40-57.
  135. Khan, F.I. and Abbasi, S.A. (2000). Estimation of probabilities and likely damage due to domino effect in a fertilizer industry. Process Safety Progress, 19(1), 40-56.
  136. Khan , F.I., Abbasi, N., Bhatia, KKS., Sharma, R., and Abbasi, S.A. (2000). Small hydro: Potential technology and environmental impacts, Journal of Institution of Public Health Engineering, 3, 38-28.
  137. Khan, F.I. and Abbasi, S.A. (1999). HAZDIG a new software package for assessing risks of accidental release of toxic chemicals. Journal of Loss Prevention in Process Industries,12, 167-181.
  138. Khan, F.I. and Abbasi, S.A. (1999). Inherently safer design based on rapid risk analysis. Journal of Loss Prevention in Process Industries, 11(3).
  139. Khan, F.I. and Abbasi, S.A. (1999). The worst chemical industry accident of 1990s - What happened and what might have been: A quantitative study. Process Safety Progress (AIChE),18, 135-145.
  140. Khan, F.I. and Abbasi, S.A. (1999). Modeling and control of the dispersion of hazardous heavy gases. Journal of Loss Prevention in Process Industries, 12, 235-244.
  141. Khan, F.I. and Abbasi, S.A. (1999). MAXCRED - A new software package for rapid risk assessment in chemical process industries. Environment Modeling and Software, 14, 11-25.
  142. Khan F.I. and Abbasi, S.A. (1999). Optimal design of multiple effect evaporator system using weighted heat transfer coefficient. Hungarian Journal of Industrial Chemistry, 27, 43-49.
  143. Khan, F.I. and Abbasi, S.A. (1999). PROFAT: A new tool for probabilistic fault tree analysis in chemical process industries. Process Safety Progress,18(1).
  144. Khan, F.I. and Abbasi, S.A. (1999). Major accidents in process industries and analysis of their causes and consequences. Journal of Loss Prevention in Process Industries, 12, 361-378.
  145. Khan, F.I. and Abbasi, S.A. (1999). Assessment of risk posed by a chemical process industry using a new computer automated tool MAXCRED-III. Journal of Loss Prevention in Process Industries,12, 455-469.
  146. Khan, F.I. and Abbasi, S.A. (1999). TORAP : Tool for Rapid risk Assessment in petroleum refinery and petrochemical industries. Journal of Loss Prevention in Process Industries, 12, 299-313.
  147. Khan, F.I., Abbasi, S.A., and Abbasi, N. (1999). Upgrading of existing Oxidation Ponds by using Macrophytes but without significant additional civil works. Indian Chemical Engineer, 41(4) Part B, 119-122.
  148. Khan , F.I., Abbasi, S.A., Sentilvelan, K., and Shabudeen, P. (1999). Water quality modeling of Buckingham canal. Environmental Health, 12 (2), 1-8.
  149. Khan, F.I. (1999). ISO 14000: know it and achieve it. Journal of Engineering Advances, June, 12-25.
  150. Khan, F.I. and Abbasi, S.A. (1998). Accident simulation as a tool for assessing & calculation environmental risk in CPI : a case study. Korean Journal of Chemical Engineering, 11(2), 12.
  151. Khan, F.I. and Abbasi, S.A. (1998). TOPHAZOP: An expert system to conduct HAZOP study effectively yet in-expensive manner. Journal of Loss Prevention in Process Industries,11(5-6), 333-343.
  152. Khan, F.I. and Abbasi, S.A. (1998). DOMIFFECT (DOMino eFFECT) : a new software for domino effect analysis in chemical process industries. Environment Modeling and Software, 13, 163-177.
  153. Khan, F.I. and Abbasi, S.A. (1998). Models for domino effect analysis in chemical process industries. Process Safety Progress, AIChE, 17 (2), 107-113.
  154. Khan, F.I. and Abbasi, S.A. (1998).Techniques and methodologies for risk analysis in chemical process industries. Journal of Loss Prevention in Process Industries,11, 261-277.
  155. Khan, F.I. and Abbasi, S.A. (1998). Rapid quantitative risk analysis petrochemical industry using new software MAXCRED. Journal of Cleaner Production, 6, 9-22.
  156. Khan, F.I. and Abbasi, S.A. (1998). Multivariate hazard identification and ranking system. Process Safety Progress, AIChE , 17 (3), 157-165.
  157. Khan, F.I. and Abbasi, S.A. (1998). Dynamic modeling and simulation of multiple effect evaporator system. Hungarian Journal of Industrial Chemistry, 26(3), 171-175.
  158. Khan, F.I. and Abbasi, S.A. (1998). Safe maintenance practice. Chemical Industry Digest, March,91-105.
  159. Khan, F.I. and Abbasi, S.A. (1997). Accident hazard index : a multi-attribute scheme for process industry hazard rating. Institution of Chemical Engineers (IChemE) of UK (Environmental protection and safety), IChemE, 75B, 217-224.
  160. Khan, F.I. and Abbasi, S.A. (1997). Risk analysis of Epichlorohydrin manufacturing industry using computer aided tool MAXCRED. Journal of Loss Prevention in process Industries,10(2), 91-100.
  161. Khan, F.I. and Abbasi, S.A. (1997). optHAZOP : An effective and optimal HAZOP study. Journal of Loss Prevention in Process Industries, 10(3), 191-204.
  162. Khan, F.I. and Abbasi, S.A. (1997). Mathematical model for HAZOP study time estimation. Journal of Loss Prevention in Process Industries,10(4), 249-257.
  163. Khan, F.I. and Abbasi, S.A. (1997). Risk analysis of chloralkali industry situated in populated area using MAXCRED-II. Process safety progress, American Institution of Chemical Engineers (AIChE), 16(3), 172-184.
  164. Khan, F.I. and Abbasi, S.A. (1997). Rapid quantitative risk analysis of using a software package MAXCRED-II. Indian Journal of Chemical Technology, 4, 196-210.
  165. Khan, F.I. and Abbasi, S.A. (1997). A maximum credible accident analysis based quantitative risk assessment study of chemical process industry. Indian Chemical Engineer, A39(2), 92-98.
  166. Khan, F.I. and Abbasi, S.A. (1997). Accidents in a chemical industry using the software package MAXCRED. Indian Journal of Chemical Technology, 3, 338-344.
  167. Khan, F.I. and Abbasi, S.A. (1996). Risk analysis of chemical process industries. Emerging Trends, Chemical Weekly, December, 1996.

Contact

Centre for Risk, Integrity and Safety Engineering (C-RISE)

230 Elizabeth Ave, St. John's, NL, CANADA, A1B 3X9

Postal Address: P.O. Box 4200, St. John's, NL, CANADA, A1C 5S7

Tel: (709) 864-8000