Conference Publications before 2013

  1. Nazir, M., Khan, F., Mangalamb, S., and Sumabatb, R. (2012). Integrity Assessment and Failure Probabilities of a Residential Single Wall Steel Aboveground Fuel Oil Storage Tanks, PSAM 11, Helsinki, June 25-29.
  2. Thodi, P., Khan, F., and Haddara, M. (2011). Risk Based Integrity Modeling for Optimal Replacement Decisions of Offshore Process Components. 24th International Congress on Condition Monitoring and Diagnostic Engineering Management, May 30-June 1, Stavanger, Norway, 2011.
  3. Ratnayaka, S., Khan, F., and Haddara, M. (2011). Risk-based accident modeling and prevention using Bayesian approach. 24th International Congress on Condition Monitoring and Diagnostic Engineering Management, May 30-June 1, Stavanger, Norway, 2011.
  4. Abbassi, R., Khan, F., and Hawboldt K. (2011). Application of a Risk-based Approach to Investigate the Waste Stabilization Pond Performance for Treating the Acid Mine Drainage, 64th Canadian Water Resources Association National Conference, St.John’s, NL, Canada, 27-30 June, 2011.
  5. Noroozi, A., Abbassi, R., Khan, F., and MacKinnon S. (2010). Comparative Evaluation of Human Error Probability Assessment Techniques, Third National Conference on Safety Engineering and HSE Management, Sharif University, Tehran, Iran, 2010.
  6. Gabbar, H. and Khan, F. (2010). Design of Fault Semantic Networks to Integrate Fault, Failure, Hazard, and Accident Models for LNG Plants, International Workshop on Real Time Measurement, Instrumentation & Control [RTMIC], IEEE NPSS (Toronto), UOIT, Oshawa, ON, 25 & 26 June, 2010.
  7. Khan, F.I. (2010). Inherent safety implementation through predictive accident modeling, 1st Safety Symposium, Texas A&M Qatar, Doha, March 15-16, 2010.
  8. Khan, F.I. and Kalantarnia, M. (2010). Dynamic risk assessment: a tool of process safety assessment and Management, European Chemical and Mechanical Industry Meeting 2010, May 16-19, Belgium.
  9. Thomas, B., Iliyas, A., Hawboldt, K., Khan, F.I., and Johasen, T (2010). Towards Sustainable and Environmentally Friendly EOR Technology for Offshore Newfoundland. Accepted for 2010 Offshore Technology Conference (OTC), Houston, Texas, US.
  10. Kalantarnia, M., Khan, F. Hawboldt, K. (2009). Risk Assessment and Management using Accident Precursors Modeling in Offshore Process Operation, Proceedings of the ASME 28th International Conference on Ocean, Offshore and Arctic Engineering, May 31 - June 5, 2009, Honolulu, Hawaii.
  11. Thodi, P., Khan, F., and Haddara, M., (2009). Development of Posterior Probability Models using the Metropolis-Hastings Algorithm and Laplace Approximations, International Conference in Ocean Engineering, ICOSSAR conference 2009, Japan.
  12. Thodi, P., Khan, F., and Haddara, M., (2009). Risk Based Integrity Management of Offshore Process Systems Using Nondestructive Inspection Data, International Conference in Ocean Engineering, ICOE 2009, IIT Madras, 1-5 Feb. 2009, India
  13. Khan, F., Thodi, P., and Haddara, M., (2009). Risk Based Integrity Modeling of Gas Processing Facilities using Bayesian Analysis, 1st Gas Processing Conference, Jan 12-15, 2009, Doha.
  14. Khan, F. (2008). Process Safety Indicator, CSChE Conference, Ottawa, October 19-22.
  15. Kalantarnia, M., Khan, F., and Hawboldt, K. (2008). Failure analysis using Bayesian approach, CSChE Conference, Ottawa, October 19-22.
  16. Khan, F., Amyotte, P., Pula, R., Veitch, B., and Ziad, M. (2008). Offshore Consequence Analysis Using Grid-Based Approach, International Probabilistic Safety Assessment and Management Conference, PSAM9, 18-23 May, Hong Kong.
  17. Tugnoli, A., Khan, F., and Amyotte, P., (2008). Inherent Safety Implementation: Throughout the Process Design Lifecycle, International Probabilistic Safety Assessment and Management Conference, PSAM9, 18-23 May, Hong Kong.
  18. Amyotte, P., Khan, F., Demichela, M., and Piccinini, N., (2008). Industrial Safety Culture – Leading Indicators and Application, International Probabilistic Safety Assessment and management conference, PSAM9, 18-23 May, Hong Kong.
  19. Amyotte, P.R., Pegg, M., and Khan, F. Application of Inherent Safety Principles in Dust Explosion Prevention and Mitigation, 12th International Symposium on Loss Prevention and Safety Promotion in the Process Industries, Edinburgh, UK (May 22-24, 2007).
  20. Nan, C., Khan, F., and Iqbal, T. Abnormal Process Condition Prediction (Fault Diagnosis) Using G2 Expert System, IEEE Conference of Canadian Conference on Electrical and Computer Engineering, 22-27 April, 2007.
  21. Nazir, M., Khan, F., and Amyotte, P. Reliability Analysis of Rigid Marine Riser, 2006 Annual Conference of Canadian Society of Civil Engineering, May 23-26, 2006.
  22. Khan, F. and Amyotte, P.R. Modeling of British Petroleum Refinery Accident, Sixth ISPHME Conference at Halifax, August 27-29, 2006.
  23. Amyotte, P., Goraya, A., and Khan, F.I. Inherent safety in Process safety management system, too be presented at AIChE’s CPCS conference, April 12-17, 2006, Orlando US.
  24. Khan, F.I., Haddara, M., and Amyotte, P. RBIM application to process system, too be presented at AIChE’s LPS conference, April 12-17, 2006, Orlando US.
  25. Nazir, M., Khan, F.I., and Amyotte, P.R. Application of Recently Revised PDF model for Continuous Shoreline Fumigation, presented 2005 CI/CS Spring Technical Meeting, Halifax, may 15-18, 2005.
  26. Pula, R., Khan, F.I., Amyotte, P.R., and Veitch, B. Phenomenological models for offshore fire and explosion consequence study, presented 2005 CI/CS Spring Technical Meeting, Halifax, may 15-18, 2005.
  27. Khan, F.I., Haddara, M., and Bhattacharya, S.K. Risk based Integrity and Inspection Modeling (RBIIM) of Process Components/System, presented at 24th OMAE 2005, June 12-17, 2005, Halkidiki, Greece.
  28. Khan, F.I. and Amyotte, P.R. I2SI: A comprehensive quantitative tool for inherent safety and cost evaluation, Presented International Conference on the 20th Anniversary of the Bhopal Gas Tragedy, December 1-3, 2004, IIT Kanpur India.
  29. Amyotte, P.R., Khan, F.I., and DiMattia, D.G. Determine human error probabilities for offshore platform muster, Presented International Conference on the 20th Anniversary of the Bhopal Gas Tragedy, December 1-3, 2004, IIT Kanpur India.
  30. Pula, R., Khan, F.I., Amyotte, P.R., and Veitch, B. Revised fire consequence model for offshore quantitative risk assessment, Presented International Conference on the 20th Anniversary of the Bhopal Gas Tragedy, December 1-3, 2004, IIT Kanpur India.
  31. Khan, F.I., Amyotte, P., and Veitch, B. Evaluation of inherent safety potential in Offshore Oil and gas activities, OMAE 2004, paper number 51528, June 20-25, 2004, Vancouver, Canada.
  32. Khan, F. Utilizing risk to optimize the maintenance cycle and minimize cost, Reliability for upstream Oil and Gas installations, 30-31 March 2004, Kuala Lumpur, Malaysia.
  33. Goraya, A., Amyotte, P.R., and Khan, F.I. An inherent safety based incident investigation methodology, Loss Prevention Symposium, 2004 Spring National Meeting, April 26-29, 2004, New Orleans, LA.
  34. Basu, A., Amyotte, P.R., and Khan, F.I. Dust explosion hazard of Fuel carry-over, The Combustion Institute Canadian Section, Queen’s University and RMC, Kingston, Vancouver, May 9-12, 2004.
  35. Khan, F.I., and Amyotte, P. Safety Measure Evaluation and Design for an offshore processing facilities using recently proposed methodology SCAP, Loss Prevention Symposium, 2004 Spring National Meeting, April 26-29, 2004, New Orleans, LA.
  36. Basu, A., Amyotte, P.R., and Khan, F.I. Reduction of dust explosion hazard by fuel substitution in power plants, The Combustion Institute Canadian Section, UBC, Vancouver, 11-14 May, 2003
  37. Amyotte, P., Khan, F.I., and Dastidar, A. Dust explosion risk reduction measures based on inherent safety framework, Process Plant Safety Symposium, 2003 Spring National Meeting, march 30-April 3, 2003., New Orleans, LA.
  38. Khan, F.I. and Amyotte, P. Integrated inherent safety index (I2SI): a tool for inherent safety evaluation, Loss Prevention Symposium, 2003 Spring National Meeting, March 31-April 3, 2003, New Orleans, LA.
  39. Khan, F.I. and Haddara, M. RBM: A new approach for process plant inspection and Maintenance Loss Prevention Symposium, 2003 Spring National Meeting, March 31-April 3, 2003, New Orleans, LA.
  40. Basu, A., Amyotte, P., and Khan, F.I. Reduction of dust explosion hazard by fuel substitution in power plants, The Combustion Institute 2003 Spring meeting, 11-14 May, 2003, Vancouver, BC.
  41. Khan F.I., Husain, T., and Amyotte, P. Safety Evaluation and Control Measure Design in a Petrochemical Industry Using SCAP, 52nd Canadian Society for Chemical Engineering, Vancouver, October, 20-23, 2002.
  42. Khan, F.I. and Husain, T. SWeHI: A new index for hazard identification in petroleum and petrochemical industries, 51st Canadian Chemical Engineering Congress, October 14-17, 2001, Halifax, NS.
  43. Khan F.I., Hejazi, R., and Husain, T. Cleaning of Petroleum Storage Tanks - Technological Innovations, Tech-fest 2001, Dhahran, SA, September, 9-11,2001
  44. Khan F.I. and Husain, T. A new methodology for safety evaluation and disaster management planning in petroleum and Petrochemical industries, to be presented in Petrotech-2001 Conference, October 28- November 1, 2001, Bahrain
  45. Khan F.I. and Husain, T. Risk-based monitored natural attenuation and its application, to be Presented and published in CSCE-2001 Conference, May 30- June 2, 2001, Victoria
  46. Husain, T., Hejazi, R., and Khan F.I. Remediation of Petroleum Contaminated Sites using Monitored Natural Attenuation Approach, Presented in Chemistry and Industry, October 30- November 1, 2000, Bahrain
  47. Khan, F.I., Ghoshal, A.K., Gupta, R. K., and Lakshmi, N. Greenbelt: a natural solution for natural pollution, Chemical Engineering Progress on Resource Development: a vision 2010 & beyond, 11 March 2000, Bubneshwar
  48. Khan, F.I. and Dhall, J. Neural Networks or traditional methods which one to follow for HEN design, Chemical Engineering Progress on Resource Development: a vision 2010 & beyond, 11 March 2000, Bubneshwar
  49. Khan, F.I., Ghoshal, A.K., and Manjare, S.D. VOC chemistry in atmosphere and its control, National Conference on Industries and Environment, Dec 28-30, 1999, Karad.
  50. Khan F.I. and Abbasi, S.A. TORAP : Tool for rapid risk assessment in petroleum refineries and petrochemical industries, International Conference on Energy Management: ENERGEX-98, Bahrain, November 14-16, 1998.
  51. Khan, F.I., Sentilvelan, K., and Abbasi, S.A. Water quality modeling: approaches to water pollution forecasting and management, National Seminar on Water Resources Management in Coastal Areas, Pondicherry, 25 March 1998.
  52. Khan, F.I., Sentilvelan, K., Abbasi, S.A., and Shabuden, A. Modeling of Buckingham canal water quality, National Seminar on Water Resources Management in Coastal Areas, Pondicherry, 25 March 1998.
  53. Khan, F.I. and Abbasi, S.A. Quantitative risk analysis of petrochemical industry, 2nd Specialty Conference on Environmental Progress in the Petroleum & Petrochemical Industries, Bahrain 17-19 November, 1997.
  54. Khan, F.I. and Abbasi, S.A. Modeling & simulation of heavy gas dispersion on the basis of modification in plume path theory, 2nd Specialty Conference on Environmental Progress in the Petroleum & Petrochemical Industries, Bahrain 17-19 November, 1997.
  55. Khan, F.I. and Abbasi, S.A. Applications of the recently modified plume path theory on dispersion on some gases, Symposium on Air Quality Management at Urban, Regional and Global scales Istanbul, Turkey 23-26 September, 1997.

Contact

Centre for Risk, Integrity and Safety Engineering (C-RISE)

230 Elizabeth Ave, St. John's, NL, CANADA, A1B 3X9

Postal Address: P.O. Box 4200, St. John's, NL, CANADA, A1C 5S7

Tel: (709) 864-8000